Online Only







ENERDRIVE EPOWER Smart Charger 40AMP / 12V
In Stock! Ship in 10-15 business days!
FREE SHIPPING ZONE
We provide free delivery for most metropolitan areas in Australia, but there may be additional delivery costs associated to some areas.

ENERDRIVE EPOWER Smart Charger 40AMP / 12V
Regular price
Sale price$599.00 (/)
Description
Features
- Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
- Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
- Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
- Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
- Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.
- Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
- LED Display: Easy to use “set and select” menu along with scrolling charger status.
- Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
- Temperature Sensor: Battery temperature sensor included with 3 meter cable.
- 5 Year Warranty from an Australian company renowned for customer support.
Specifications
Model | EN31240 |
CHARGER OUTPUT | |
Output Current (Maximum) | 40A |
OUTPUT VOLTAGE RANGE | |
Charge | 14.2 – 15.5 V |
Float | 13.4 – 13.8 V |
– Equalize | 16.0 V |
DC Output Bank | Three (1 fully independent, 2 common with diode isolation) |
Selectable Battery Type | Gel, AGM, Flooded, Lithium, Program |
Standby Current | < 2 mA |
CHARGER INPUT | |
AC Input Voltage (Nominal) | 90 to 265 VAC |
AC Input Operating Range | 207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max) |
AC Input Frequency Range | 47 – 63 Hz |
Power Consumption | 700W (Full Load) |
Power Factor Correction | Yes |
Charger Efficiency | > 82% |
PROTECTION AND FEATURES | |
Reverse Polarity | Yes, (with user replaceable fuse/s) |
Over Charge | Yes, unit shutdown |
Over Temperature | Yes, unit de-rated and shutdown |
Output Short Circuit | Yes, (with user replaceable fuse/s) |
Cooling | Forced air ventilation (thermo controlled fan) |
Temperature Setting | Hot, Normal, Cold (no sensor connected) |
Battery Temp Sensor Port | RJ12 (standard battery temp. sensor supplied) |
DISPLAY | |
LCD Display (with back light) | Charging status, Battery Voltage, Output Current & Fault Codes. |
AC INPUT AND DC OUTPUT CONNECTION | |
AC Input Connection | IEC with Supplied 1.2M Power Lead |
DC Output Connection | Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread |
DC Output Ground | Single Heavy Duty Common Ground Stud |
ENVIRONMENTAL AND OPERATING TEMPERATURE | |
Storage Range | -40° to 70° C |
Operating Range | -20° to 60° C |
Humidity | 5-95%, relative humidity non-condensing |
Ingress Protection | IP32 (Basic drip proof in vertical orientation) |
Base Unit Weight and Dimensions | |
Weight: (kg) | 2.6 |
Dimension: (mm) L x W x H | 295 x 206 x 86 |
Optional Accessories | Remote Digital Display / Enerdrive Part Number EN3REM |
Regulatory Compliance | Complies with AS/NZS 60335.2.29 Including Australian deviations. |
Features
- Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
- Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
- Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
- Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
- Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.
- Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
- LED Display: Easy to use “set and select” menu along with scrolling charger status.
- Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
- Temperature Sensor: Battery temperature sensor included with 3 meter cable.
- 5 Year Warranty from an Australian company renowned for customer support.
Model | EN31240 |
CHARGER OUTPUT | |
Output Current (Maximum) | 40A |
OUTPUT VOLTAGE RANGE | |
Charge | 14.2 – 15.5 V |
Float | 13.4 – 13.8 V |
– Equalize | 16.0 V |
DC Output Bank | Three (1 fully independent, 2 common with diode isolation) |
Selectable Battery Type | Gel, AGM, Flooded, Lithium, Program |
Standby Current | < 2 mA |
CHARGER INPUT | |
AC Input Voltage (Nominal) | 90 to 265 VAC |
AC Input Operating Range | 207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max) |
AC Input Frequency Range | 47 – 63 Hz |
Power Consumption | 700W (Full Load) |
Power Factor Correction | Yes |
Charger Efficiency | > 82% |
PROTECTION AND FEATURES | |
Reverse Polarity | Yes, (with user replaceable fuse/s) |
Over Charge | Yes, unit shutdown |
Over Temperature | Yes, unit de-rated and shutdown |
Output Short Circuit | Yes, (with user replaceable fuse/s) |
Cooling | Forced air ventilation (thermo controlled fan) |
Temperature Setting | Hot, Normal, Cold (no sensor connected) |
Battery Temp Sensor Port | RJ12 (standard battery temp. sensor supplied) |
DISPLAY | |
LCD Display (with back light) | Charging status, Battery Voltage, Output Current & Fault Codes. |
AC INPUT AND DC OUTPUT CONNECTION | |
AC Input Connection | IEC with Supplied 1.2M Power Lead |
DC Output Connection | Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread |
DC Output Ground | Single Heavy Duty Common Ground Stud |
ENVIRONMENTAL AND OPERATING TEMPERATURE | |
Storage Range | -40° to 70° C |
Operating Range | -20° to 60° C |
Humidity | 5-95%, relative humidity non-condensing |
Ingress Protection | IP32 (Basic drip proof in vertical orientation) |
Base Unit Weight and Dimensions | |
Weight: (kg) | 2.6 |
Dimension: (mm) L x W x H | 295 x 206 x 86 |
Optional Accessories | Remote Digital Display / Enerdrive Part Number EN3REM |
Regulatory Compliance | Complies with AS/NZS 60335.2.29 Including Australian deviations. |