ENERDRIVE Smart Charger 100AMP / 12V EN312100

FEATURES
Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
Current Control: User adjustable current output (e.g. Dial the 100amp unit back to run off a 1kVA generator).
Smart Charging: The ePOWER 100A battery charger will regulate its output based on the loads connected to your battery banks.
Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
LED Display: Easy to use “set and select” menu along with scrolling charger status.
Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
Temperature Sensor: Battery temperature sensor included with 3 meter cable.
5 Year Warranty from an Australian company renowned for customer support.

SPECIFICATIONS
Model EN312100
CHARGER OUTPUT
Output Current (Maximum) 100A
OUTPUT VOLTAGE RANGE
Charge 14.2 15.5 V
Float 13.4 13.8 V
Equalize 15.5 V
DC Output Bank Three (1 fully independent, 2 common with diode isolation)
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Standby Current 5 mA
CHARGER INPUT
AC Input Voltage (Nominal) 100,120,220,230,240 VAC
AC Input Operating Range 207-265 VAC (7.6 A Max)90-125 VAC (15.9 A Max)
AC Input Frequency Range 47 63 Hz
Power Consumption 1750W (Full Load)
Power Factor Correction Yes
Charger Efficiency 82%
PROTECTION AND FEATURES
Reverse Polarity Yes, (with user replaceable fuse/s)
Over Charge Yes, unit shutdown
Over Temperature Yes, unit de-rated and shutdown
Output Short Circuit Protected, charger shutdown
Cooling Forced air ventilation (thermo controlled fan)
Temperature Setting Hot, Normal, Cold (no sensor
PACKAGE INCLUDES
1x 100A Smart battery charger

WARRANTY
5 Years Warranty